The India Ministry of New and Renewable Energy (MNRE) has released a QCO for “Solar Systems, Devices and Components Goods Order, 2025” regarding Solar Photovoltaic (PV) Modules for the implementation.
The official notification can be accessed from here: Implementation guideline for Solar PV modules
Seen in below table below for the revised standards:
S. No. | Product | Existing IS standard | Revised Standard notified in QCO | Indian standard/Product |
1. | Crystalline Silicon Terrestrial Photovoltaic (PV) modules (Si wafer based) | IS 14286: 2010/ IEC 61215: 2005 | IS 14286 (Part 1): 2023/ IEC 61215 – 1: 2021 | Design qualification and Type approval |
IS 14286 (Part 1/Sec 1): 2023/ IEC 61215-1-1: 2021 | Special requirements for testing of crystalline silicon photovoltaic (PV) modules. |
IS/IEC 61730 – 1: 2004 | IS/IEC 61730 – 1: 2016 | Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction |
IS/IEC 61730 – 2: 2004 | IS/IEC 61730 – 2: 2016 | Photovoltaic (PV) Module Safety Qualification Part 2 Requirements for Testing |
2. | Thin-Film Terrestrial Photovoltaic (PV) Modules [CdTe, a-Si, Cu (In,Ga)(S,Se) | IS 16077: 2013/ IEC 61646: 2008 | IS 14286 (Part 1): 2023/ IEC 61215 – 1: 2021 | Design Qualification and Type Approval Part 1 Test Requirements |
IS 14286 (Part 1/Sec 2): 2023/ IEC 61215-1-2: 2021 | Special requirements for testing of thin film cadmium telluride (CdTe) based photovoltaic (PV) modules |
IS 14286 (Part 1/Sec 3): 2023/ IEC 61215-1-3: 2021 | Special requirements for testing of thin- film amorphous silicon based photovoltaic (PV) modules |
IS 14286 (Part 1/Sec 4): 2023/ IEC 61215-1-4: 2021 | Special requirements for testing of thinfilm Cu (In,Ga)(S,Se)2 based photovoltaic (PV) modules |
IS/IEC 61730 – 1: 2004 | IS/IEC 61730 – 1: 2016 | Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction |
IS/IEC 61730 – 2: 2004 | IS/IEC 61730 – 2: 2016 | Photovoltaic (PV) Module Safety Qualification Part 2 Requirements for Testing |
Key Highlights:
IS 14286 (Part 1): 2023 / IEC 61215-1: 2021 defines the general requirements for all types of Solar PV modules included in the IS 14286 series, serving as the main reference standard for the entire series.
As per the new QCO of MNRE, Solar PV Module must meet a minimum efficiency level when tested under Standard Test Conditions (STC). Accordingly,Labs must specify the module’s output (in W), area (m²), and calculated efficiency (in %) as per the QCO under the “Description of Module Construction.”
All manufacturers are required to implement the revised standards and the new QCO within the stipulated timeline.
For full support with your global market access requirements or regulatory intelligence needs please contact us at customer-service@vscbcorp.com.